Procurement
Supplier management
Planning and inventory
Contracts and organization
By challenge
Aerospace and defense supply chain consulting.
Aerospace and defense work depends on long lead castings and forgings, special processes, and suppliers that are hard to replace. Inside your team, our work is to get parts on the promised date and keep supplier control ready for an AS9100 audit. Long-term agreements then hold the pricing.
- 72% to 96%supplier on-time delivery in 12 months
- 200+active suppliers in an aerospace and defense base
- 2,500+SKUs managed in aerospace and defense
From our operating experience. Not client results.
Long lead times and short source lists.
Late parts and audit findings tend to start in the same places.
Long lead material
Castings, forgings, and raw material to AMS and ASTM specifications often carry the longest lead times on the bill of material. When demand reaches suppliers late, every order starts behind.
Special process queues
Heat treat, anodize, plating, and NDT often sit at a sub-tier the prime supplier does not control. Where your customer requires Nadcap accreditation or its own approval, the list of sources is short.
Supplier control at audit time
AS9100 clause 8.4 expects an approved supplier list, purchase orders that state every requirement, and proof that supplier performance is reviewed. Gaps become findings.
Single sources
Many parts have one qualified supplier. Some source changes need customer approval or a new first article, so a second source has to be started before the first one misses.
What we do for aerospace and defense manufacturers.
7 items
| Problem | What we do | Service |
|---|---|---|
| Suppliers deliver late | One on-time delivery metric from your ERP receipt history, supplier scorecards, and root cause recovery plans. | Supplier on-time delivery and scorecards |
| Audit findings in purchasing | Approved supplier list, purchase order quality clauses, a first article and receiving inspection plan, and special process sources checked against Nadcap and customer approvals. | AS9100 and Nadcap supply chain |
| Castings, forgings, machining, and special processes are hard to place | RFQ packages with drawings, specifications, and quality requirements, sent to sources that can do the work. | Build-to-print and special process sourcing |
| Prices move at every order | Sourcing events by category, then long-term agreements and stocking agreements with suppliers that can hold them. | Strategic sourcing and long-term agreements |
| One supplier carries too much risk | Supplier tiering by spend, criticality, and single-source exposure, with a secondary-source qualification plan. | Supplier performance and development |
| Receiving inspection is a bottleneck | A ship-to-stock program with entry and exit criteria for proven suppliers. | Ship-to-stock programs |
| Component lead times are too long | Lead time broken into its parts, then shortened through planning, stocking agreements, and closer sources. | Lead time reduction |
What you receive.
6 deliverables
- Supplier scorecards for delivery and quality, built from your ERP data
- Approved supplier list with scope, status, and re-evaluation dates
- Purchasing gap review against AS9100 clause 8.4
- Special process source list checked against Nadcap and customer approvals
- Secondary-source qualification plan for single-source components
- Long-term agreement terms for your largest categories
Standards, contracts, and systems we have worked within
- AS9100
- ISO 9001
- Nadcap
- First article inspection
- DCMA and DCAA
- FFP, IDIQ, CPFF, OTA
- Infor LN
- Shoptech E2
- Fishbowl
From operating experience.
- Supplier on-time delivery raised from 72% to 96% within 12 months, across a 200+ supplier aerospace and defense base.
- 40% less incoming inspection volume through a ship-to-stock program for top-performing suppliers.
- Compliance kept with AS9100, ISO 9001, Nadcap, and DCMA/DCAA requirements across FFP, IDIQ, CPFF, and OTA contract vehicles.
- Stable pricing secured through long-term agreements with key suppliers, with secondary sources qualified for single-source components where applicable.
- Prototype development and first article test (FAT) qualifications with suppliers in India and Taiwan.
- 2,500+ SKUs and 200+ active suppliers managed in aerospace and defense.
These results were delivered while running supply chain organizations between 2017 and 2021. They are operator results, not client results. See all results
Three ways to work together.
3 items
| Type | What it is | What you receive |
|---|---|---|
| Assessment | A fixed-scope review of spend, suppliers, inventory, and contracts. | A baseline and a ranked list of opportunities. |
| Project | One defined outcome, such as a sourcing event, a long-term agreement program, or an S&OP rollout. | Signed agreements or a working process, measured against the target. |
| Continual requirement | Recurring supplier reviews, contract management, planning support, and process audits. | Scorecards, audit results, and actions each period. |
Aerospace and defense supply chain questions.
Do you work with small and mid-size aerospace and defense suppliers?
Yes. Our experience includes leading the supply chain for an aerospace and defense contractor: teams of 12 and 15 people and supplier bases of 60+ and 200+ active suppliers.
Do you certify companies to AS9100?
Certification comes from an accredited registrar. We prepare the supply chain and purchasing side. See AS9100 and Nadcap supply chain.
Which commodities have you sourced?
We have sourced sand castings, forgings, machining, welding, and build-to-print fabricated components. Raw material has been to AMS, ASTM, and DIN specifications. Special processes include hard-coat anodize, passivation, cadmium, electroless nickel, heat treat, and NDT. The list also covers hardware, wire harnesses, cable assemblies, and PCB assemblies.
How do you handle ITAR-controlled drawings?
Technical data goes only to suppliers authorized to receive it. See build-to-print and special process sourcing and ITAR and FAR/DFARS flow-downs.
What on-time delivery result comes from your aerospace and defense experience?
Supplier on-time delivery rose from 72% to 96% within 12 months, across a 200+ supplier base. See supplier on-time delivery and scorecards.
Not ready to talk? Start here.
Use these on your own. No form to fill in.
- Self-check: your supply chain in ten questionsYour score shows on screen, with where to look first.
- Tool: FAR and DFARS flow-down matrix19 clauses you can filter, with a spreadsheet to download.
- Guide: FAR and DFARS flow-down clausesWhat flows down, when, and what the supplier must do.
- Guide: what a supply chain consultant costsFee models, what drives the cost, and when to hire one.
Start with a 30‑minute conversation.
List the parts that arrive late and the next audit on your calendar. We reply to every message directly.
Supply chain, procurement, and contract management services for aerospace, defense, and industrial manufacturers, for a single project or a continual requirement.
Start a conversation