Procurement
Supplier management
Planning and inventory
Contracts and organization
By challenge
FAR and DFARS flow-down clauses: a guide for purchasing teams.
A flow-down clause is a requirement in your customer’s contract that you must pass on to your own suppliers. This guide is for buyers at defense subcontractors. It covers which clauses reach a purchase order, when they do, and what the supplier then has to do.
By Sagemore, a supply chain, procurement, and contract consulting firm. Clause text checked against ecfr.gov and acquisition.gov on . Published .
Procurement guidance, not legal advice.
We write from the supply chain side. This guide does not rule on how a clause applies to your contract. Your contract, your contracts team, and your legal counsel decide that, and your attorney approves the final language.
What is a flow-down clause?
A flow-down clause, also written flowdown, is a clause in a prime contract or a higher-tier subcontract that the contractor is required to include in its own subcontracts and purchase orders. Most of the clauses in this guide say so in a paragraph titled Subcontracts, near the end of the clause.
That paragraph sets the rule. Some clauses go into every subcontract. Some apply only above a dollar value, only to certain items, or only when the supplier handles certain information. Some stop at commercial products or at commercially available off-the-shelf (COTS) items. A few have no flow-down paragraph at all and still leave you needing data from suppliers.
A purchase order counts. FAR 44.101 defines a subcontract to include purchase orders, and changes and modifications to purchase orders.
Which FAR and DFARS clauses flow down to subcontractors?
Only the ones in your own contract, and only as each clause directs. There is no single list for every contract. Start with the clause list in the contract or purchase order you received, and read the Subcontracts paragraph of each clause.
The clauses in this guide follow a small set of patterns.
- Every subcontract: for example DFARS 252.225-7048 for export-controlled items and FAR 52.204-25 for certain telecommunications equipment.
- By the information the supplier handles: FAR 52.204-21 for Federal contract information, DFARS 252.204-7012 for covered defense information, and DFARS 252.204-7021 (CMMC) for either, where your contract carries it.
- By what the item contains: DFARS 252.225-7009 for specialty metals, DFARS 252.225-7052 for certain magnets, tantalum, and tungsten, and DFARS 252.246-7008 for electronic parts.
- By dollar value: FAR 52.209-6 above $45,000, and FAR 52.203-13 above $7.5 million with a performance period of more than 120 days.
- No flow-down, but supplier data is still needed: DFARS 252.225-7001, the Buy American Act (BAA) clause, has no Subcontracts paragraph, yet you need to know where components come from.
FAR and DFARS flow-down matrix: when does each clause flow down, and what must the supplier do?
Each clause sets its own rule. This starting matrix lists 19 FAR and DFARS clauses that reach purchase orders for parts, material, and special processes on defense work, with when each one flows down and what the supplier must do. It summarizes the codified text of each clause, and each clause number links to the official text. Read the clause before you rely on a row, and work from the version your contract cites. DoD contracts written since February 2026 can show different clause numbers.
No clause matches. Clear the filter to see every clause.
| Clause | Title | When it flows down | What the supplier must do |
|---|---|---|---|
| FAR 52.244-6 | Subcontracts for Commercial Products and Commercial Services | Its terms go into the subcontracts awarded under the contract. It lists the FAR clauses that must go into subcontracts for commercial products and commercial services. | Pass the listed clauses to its own suppliers of commercial products and services, as each clause directs. |
| DFARS 252.244-7000 | Subcontracts for Commercial Products or Commercial Services | Its terms go into the subcontracts awarded under the contract, including those for commercial products and commercial services. | Leave FAR and DFARS clause terms out of commercial subcontracts unless the DFARS clause says it applies there, or the FAR lists the clause for commercial subcontracts. |
| FAR 52.204-21 | Basic Safeguarding of Covered Contractor Information Systems | Subcontracts where the supplier may have Federal contract information in, or passing through, its information system. Includes commercial products and services. Not COTS items. | Apply the 15 basic safeguarding requirements in the clause to those systems. |
| DFARS 252.204-7012 | Safeguarding Covered Defense Information and Cyber Incident Reporting | Subcontracts for operationally critical support, or where performance will involve covered defense information. Includes commercial products and services. Flowed without alteration, except to identify the parties. | Protect covered defense information under NIST SP 800-171. The clause DoD uses under its 2026 class deviation names Revision 2. Report cyber incidents to DoD within 72 hours of discovery. Give the incident report number to the customer, and tell the customer when asking to vary from a NIST SP 800-171 requirement. |
| DFARS 252.204-7020 | NIST SP 800-171 DoD Assessment Requirements | The substance goes into all subcontracts, including commercial products and services. Not COTS items. A subcontract that is subject to NIST SP 800-171 may not be awarded unless the supplier has completed at least a Basic Assessment within the last 3 years. In contracts written under the 2026 DoD class deviation, 252.240-7997 replaces this clause, and it has no Basic Assessment. | Complete a Basic NIST SP 800-171 DoD Assessment for the systems involved, have the summary score posted in SPRS, and give the Government access for a Medium or High Assessment if one is needed. |
| DFARS 252.204-7021 | Contractor Compliance With the Cybersecurity Maturity Model Certification Level Requirements | Only where your contract carries the clause. Then it goes into subcontracts that will require the supplier to process, store, or transmit Federal contract information or controlled unclassified information. Includes commercial products and services. Not COTS items. Before award, the buyer confirms the supplier has a current CMMC status at the right level. | Hold a current CMMC status at the level 32 CFR 170.23 sets for the information it will handle, and keep an annual affirmation of continuous compliance. |
| FAR 52.204-25 | Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment | The substance goes into all subcontracts and other contractual instruments, including commercial products and services. | Must not provide equipment, systems, or services that use covered telecommunications equipment or services as a substantial or essential component of a system, or as critical technology, unless an exception in the clause or a waiver applies. Report any that is found within one business day. |
| DFARS 252.225-7009 | Restriction on Acquisition of Certain Articles Containing Specialty Metals | Subcontracts for items that contain specialty metals, including commercial products. Paragraphs (a) through (c) and (e)(2) are inserted. Paragraph (d) is left out. | Supply specialty metals melted or produced in the United States, its outlying areas, or a qualifying country, unless an exception in paragraph (c) applies. The exceptions include electronic components and most COTS items. |
| DFARS 252.225-7052 | Restriction on the Acquisition of Certain Magnets, Tantalum, and Tungsten | Subcontracts for items that contain a covered material: samarium-cobalt or neodymium-iron-boron magnets, tantalum metals and alloys, tungsten metal powder, or tungsten heavy alloy. Includes commercial products, unless an exception in the clause applies. | Must not deliver covered material melted or produced in a covered country. The clause names four. The codified clause extends this from January 1, 2027 to material mined, refined, or separated there. Congress has limited that extension to contracts awarded on or after January 1, 2027, and DoD contracts written under the class deviation carry the clause as 252.225-7961. Check which version your contract cites. |
| DFARS 252.225-7001 | Buy American and Balance of Payments Program | The clause has no flow-down paragraph. It requires the contractor to deliver domestic end products, unless its offer said otherwise. | Nothing under the clause itself. The buyer still needs each supplier to state where components are mined, produced, or manufactured, because the domestic content test counts them. |
| DFARS 252.246-7007 | Contractor Counterfeit Electronic Part Detection and Avoidance System | Subcontracts for electronic parts or assemblies containing electronic parts, including commercial products. Paragraphs (a) through (e) are flowed, without the opening sentence that limits the clause to contractors under the Cost Accounting Standards. | Keep a risk-based system to detect and avoid counterfeit electronic parts. It covers training, inspection and testing, traceability, sources of supply, and reporting and quarantine of suspect parts. |
| DFARS 252.246-7008 | Sources of Electronic Parts | Subcontracts for electronic parts or assemblies containing electronic parts, including commercial products, unless the supplier is the original manufacturer. | Buy electronic parts first from the original manufacturer, its authorized suppliers, or suppliers that obtain them only from those sources. Keep traceability to the original manufacturer, or be responsible for inspection, testing, and authentication. |
| FAR 52.246-26 | Reporting Nonconforming Items | Subcontracts for items under higher-level quality requirements, items the contractor determines to be critical, and, on DoD work, electronic parts when the subcontract exceeds the simplified acquisition threshold. Not flowed to subcontracts for commercial products and commercial services. | Screen GIDEP reports. Give written notice of counterfeit or suspect counterfeit items within 60 days and hold them until told what to do with them. Report those items, and common items with a major or critical nonconformance, to GIDEP within 60 days. |
| DFARS 252.246-7003 | Notification of Potential Safety Issues | Subcontracts for parts identified as critical safety items, for systems, subsystems, assemblies, and subassemblies integral to a system, and for repair, maintenance, logistics support, or overhaul of them. Includes commercial products and services. | Notify the customer of the nonconformances and deficiencies the clause describes as soon as practicable and within 72 hours, then in writing within 5 working days. Notify the contracting officers as well, if the supplier knows who they are. |
| DFARS 252.223-7008 | Prohibition of Hexavalent Chromium | All subcontracts for supplies, maintenance and repair services, or construction materials, including commercial products and services. | Must not provide a deliverable that contains hexavalent chromium above 0.1 percent by weight in any homogeneous material, or one that needs hexavalent chromium removed or reapplied during later sustainment, unless the contracting officer has authorized it. Hexavalent chromium produced as a by-product of manufacturing is not covered. |
| DFARS 252.225-7048 | Export-Controlled Items | The substance goes into all subcontracts. | Comply with the export control laws and regulations that apply, including the ITAR and the EAR, and register with the Department of State where the ITAR requires it. |
| FAR 52.211-15 | Defense Priority and Allocation Requirements | The clause marks the contract as a rated order. 15 CFR 700.15 then requires the same priority rating on orders placed with suppliers for the items needed to fill it. 15 CFR 700.17 lifts that duty for small orders that can be delivered on time without the rating. | Accept or reject the rated order in writing within 15 working days for a DO rating or 10 working days for a DX rating, schedule the work to meet its delivery date, and place rated orders with its own suppliers. |
| FAR 52.209-6 | Protecting the Government’s Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded | Subcontracts above $45,000. Not subcontracts for COTS items. Not flowed when the prime contract is for commercial products or commercial services. | State in writing, at award, whether it or its principals are debarred, suspended, proposed for debarment, or voluntarily excluded. |
| FAR 52.203-13 | Contractor Code of Business Ethics and Conduct | Subcontracts above $7.5 million with a performance period of more than 120 days. FAR 52.244-6 lists it for commercial subcontracts as well. | Have a written code of business ethics and conduct, and disclose credible evidence of the violations the clause names. |
Dollar values are those in the codified FAR on November 14, 2026: $45,000 in FAR 9.405-2(b), $7.5 million in FAR 3.1004(a), and $350,000 for the simplified acquisition threshold in FAR 2.101. They changed on October 1, 2025, so older terms and conditions may show different figures. Under the 2026 DoD class deviations, some of these clauses appear under new numbers, including FAR 52.204-21 and 52.204-25 and DFARS 252.204-7020, 252.225-7052, and 252.244-7000.
Do flow-down clauses apply to commercial and COTS suppliers?
Fewer of them do. Under FAR 44.402, only the clauses listed in FAR 52.244-6 are required in subcontracts for commercial products and commercial services. DFARS 252.244-7000 adds that a DFARS clause goes into a commercial subcontract only when the clause itself says so.
Several DFARS clauses do say so. DFARS 252.204-7012 still applies to commercial subcontracts where covered defense information is involved. The specialty metals, magnets, electronic parts, and hexavalent chromium clauses in the matrix also name subcontracts for commercial products.
COTS items are treated more lightly again. FAR 52.204-21, DFARS 252.204-7020, DFARS 252.204-7021, and FAR 52.209-6 do not flow to COTS items. DFARS 252.225-7009 excepts most COTS items, with limits. Specialty metal mill products such as bar, plate, and sheet are still covered, and so are forgings, castings, and fasteners that are not already built into a COTS item. Fasteners have their own exception.
DFARS 252.244-7000 also tells the contractor to treat as commercial products any items valued at less than $10,000 per item that were bought for use on multiple contracts and cannot be tied to one contract when purchased.
Sorting each purchase into commercial, COTS, or neither is one column of the clause matrix we build from your contract.
Which suppliers need DFARS 252.204-7012 and CMMC?
A supplier needs DFARS 252.204-7012 when its work will involve covered defense information, such as a controlled drawing, or when it provides operationally critical support. The clause requires that information to be protected under NIST SP 800-171 and cyber incidents to be reported. CMMC follows the same sorting, where your contract carries DFARS 252.204-7021.
Sort suppliers by the information they receive or create for the contract, not by what they make. A supplier that sees only a part number and a quantity is in a different group from one that receives a controlled drawing.
Under DFARS 252.204-7021 and 32 CFR 170.23, a supplier that will handle only Federal contract information needs CMMC Level 1 (Self). A supplier that will handle controlled unclassified information needs at least Level 2 (Self). The rule also provides for Level 2 (C3PAO) where the prime contract requires Level 2 (C3PAO) or Level 3 (DIBCAC). On July 13, 2026, DoD suspended the move to the next CMMC phase, the phase that brings in third-party assessments, so work from the level your own contract states. The buyer confirms the status before award.
Finding which suppliers are in scope is part of our FAR/DFARS flow-down consulting.
What should a buyer check before sending ITAR technical data to a supplier?
Check who will receive the technical data. Under 22 CFR 120.50, releasing ITAR technical data to a foreign person counts as an export, even inside the United States. A license, an exemption, or another export authorization has to be in place before the data is sent.
Record each supplier’s registration status. Under 22 CFR 122.1, a company that manufactures defense articles in the United States is required to register with the Directorate of Defense Trade Controls, even if it does not export. Limited exemptions apply.
DFARS 252.225-7048 puts the general duty to follow export control laws into every subcontract. It does not replace the ITAR. Your export compliance lead and counsel decide what authorization a transfer needs.
What should a buyer do when a flow-down arrives?
Work in order, from the contract received to the purchase order sent.
Get the clause list
Pull every clause, with its date, from the prime contract or subcontract, your customer’s terms and conditions, and any quality attachments.
Read each Subcontracts paragraph
Find the flow-down rule in the clause itself, in the version your contract cites: at ecfr.gov or acquisition.gov for codified clauses, and in the DoD class deviation for clauses marked DEVIATION. Do not rely on a list from another program, because each contract carries a different set of clauses.
Sort the clauses
Mark each one: flows to every subcontract, flows on a condition, or does not flow but needs supplier data. Note the condition next to the clause.
Classify each purchase
For each supplier and order, record whether the item is a commercial product or a COTS item, what information the supplier will receive, what the item contains, the order value, and whether the order is rated.
Build your own matrix
Start from the matrix in this guide. Put clauses down the side and supplier types across the top: build-to-print parts, raw material, hardware distributors, special processes, and electronic parts. Each cell says whether the clause flows, and on what condition.
Write clause sets
Turn the matrix into purchase order clause sets inside your terms and conditions, one for each supplier type, so buyers select a set instead of editing by hand.
Check the supplier before award
Check SAM.gov exclusions for orders above $45,000. Where your contract requires it, check the assessment or CMMC status of any supplier that will receive controlled information. Confirm who may receive export-controlled data.
Get the clauses acknowledged
Have the supplier confirm in writing that it accepts the flowed clauses, and keep the record in the supplier file.
Keep the matrix current
Check every contract modification against the matrix. Review the matrix when a regulation changes, as the dollar thresholds did on October 1, 2025.
Why does a 2026 DoD contract show different clause numbers?
The FAR overhaul is the reason a 2026 DoD contract can differ. Since February 2026, DoD contracting officers have used rewritten FAR and DFARS text under class deviations, in place of the codified text. Some requirements moved to a new clause number, and a few changed in substance.
- FAR 52.240-91, Security Prohibitions and Exclusions, gathers the Kaspersky, telecommunications, ByteDance, FASCSA order, and unmanned aircraft prohibitions that the codified FAR carries in 52.204-23, 52.204-25, 52.204-27, 52.204-30, and 52.240-1.
- FAR 52.240-93 carries the basic safeguarding requirement that the codified FAR carries in 52.204-21.
- DFARS 252.240-7997 takes the place of 252.204-7020, and it is shorter. It still requires the supplier to give the Government access for a Medium or High Assessment, and it still goes into all subcontracts except those for COTS items. It no longer contains the Basic Assessment, or the rule against awarding a subcontract without one.
- DFARS 252.244-7999 takes the place of 252.244-7000 for subcontracts for commercial products and commercial services.
- DFARS 252.204-7012 and 252.204-7021 keep their numbers. Under the deviation, 252.204-7012 carries a 2026 date and names NIST SP 800-171 Revision 2.
Older contracts keep the codified clauses, so a purchasing team can hold both sets at once. Build the matrix from the clause numbers and dates in each contract. The deviations stay in effect until they are rescinded or written into the regulations. The FAR text is posted at acquisition.gov/far-overhaul. DoD posts the current DFARS deviation text on its own class deviations page, and it revises that text often.
From operating experience.
- A terms and conditions framework with contract-specific flow-downs for cybersecurity, ITAR, FAR/DFARS, and warranty clauses.
- Compliance kept with AS9100, ISO 9001, Nadcap, and DCMA/DCAA requirements across FFP, IDIQ, CPFF, and OTA contract vehicles.
- Materials and components sourced for F-35A/C, F-18, V-22, CH-53K, B-52, B-1, and LAU-116B/A contract requirements.
These results were delivered while running supply chain organizations between 2017 and 2021. They are operator results, not client results. See all results
FAR and DFARS flow-down questions.
Is this guide legal advice?
No. This guide is procurement guidance. Your contracts team and legal counsel decide how a clause applies to your contract.
What are the mandatory FAR flow-down clauses?
They differ by contract, so there is no single list. A clause is mandatory in a subcontract when it is in your contract and its own text requires the flow-down. For subcontracts for commercial products and commercial services, FAR 52.244-6 lists the FAR clauses that must be included.
Is there a standard DFARS flow-down matrix?
Not one that fits every contract. Each clause states its own flow-down rule, and each contract carries a different set of clauses. The matrix in this guide is a starting point. Your own matrix has to be built from your own contract.
Do DFARS flow-down clauses apply to small businesses?
Yes, when the clause’s own rule is met. The flow-down paragraphs of the clauses in this guide turn on the item, the order value, and the information the supplier handles, not on the supplier’s size. Where your contract carries DFARS 252.204-7012, a small machine shop that receives covered defense information is covered like any other supplier.
Which suppliers are exempt from flow-down clauses?
It depends on the clause. Subcontracts for commercial products and commercial services take only the FAR clauses listed in FAR 52.244-6 and the DFARS clauses that say they apply. Several clauses in this guide leave out COTS items, and some apply only above a dollar value.
Does CMMC flow down to suppliers?
Where your contract carries DFARS 252.204-7021, yes. The clause goes into subcontracts that will require the supplier to process, store, or transmit Federal contract information or controlled unclassified information. It does not flow to COTS items. Before award, the buyer confirms that the supplier has a current CMMC status at the level the information requires.
What if a supplier will not accept a flow-down clause?
First check that the clause applies to that supplier. Several clauses in this guide do not reach commercial or COTS items, or orders below a dollar value. If the clause does apply, do not drop it on your own. Raise it with your contracts team. For electronic parts, DFARS 252.246-7008 sets out what the contractor must do when a supplier refuses the clause.
Sources and review date.
Every clause statement in this guide was checked against the official text on November 13, 2026. Regulations change, so read the current text before you rely on any of it.
- Electronic Code of Federal Regulations, Title 48 (FAR in chapter 1, DFARS in chapter 2), current as of November 10, 2026. Each clause number in the matrix links to its section.
- FAR at acquisition.gov, FAC 2026-01, effective March 13, 2026, and DFARS at acquisition.gov, DFARS Change 05/07/2026.
- FAR overhaul text and agency deviations at acquisition.gov. DoD has used its class deviations since February 2026 and has revised many of them. On November 14, 2026, the current versions included 2026-O0015, Revision 1 (Part 44), 2026-O0025, Revision 3 (Part 40), 2026-O0041, Revision 1 (Part 225), and 2026-O0043 (Part 204). DoD posts its current deviations on its class deviations page.
- 15 CFR part 700, Defense Priorities and Allocations System.
- 22 CFR part 120 and 22 CFR part 122, International Traffic in Arms Regulations.
- 32 CFR 170.23, CMMC application to subcontractors.
This guide is procurement guidance, not legal advice.
Start with a 30‑minute conversation.
Tell us which clauses your contract carries and what you buy. Do not send drawings, technical data, or other controlled information. We reply to every message directly.
Supply chain, procurement, and contract management services for aerospace, defense, and industrial manufacturers, for a single project or a continual requirement.
Start a conversation